how to use cable splitter

6 Steps Guide on How To Use a Cable Splitter

You don’t have to skip your favorite TV show while watching a live sports event. A cable splitter solves this problem by playing the sports live and recording the TV program simultaneously!

Splitters allow you to connect many TVs, PCs, or other third-party devices to a single source. A splitter is an easy and cost-effective option for homes with internet and TV hooked up to the same line.

Do you think you may require more than two connections?

To satisfy user requirements, there’s even a 16-way splitter!

All in all, splitters are an excellent alternative for multiple outlets, only if you have the know-how to utilize them correctly. In this article, we’ll be discussing this tool and the usage of cable splitter in depth.

A cable splitter is a device that allows you to divide a single Ethernet cable into two separate Ethernet cables.

What Is A Cable Splitter?

cable splitter

A cable splitter is a device that divides a signal across numerous devices.

The equipment looks like a box with a single input option on one side and multiple outputs.

You can get this in electronics stores. There are multiple options available to choose from: single-way, two-way, three-way, four-way, six-way, and even sixteen-way configurations.

With the latest splitting devices, you can watch HD quality streams without any quality disruption.

How Cable Splitters Work?

how cable splitter work

When you want to use two TVs with one cable connection, you will either need a cable connection in every room or a means of sharing the cable connection. You can quickly achieve this with a cable splitter.

Cable splitters create numerous outputs for a single transmission. 

It’s a tiny box that is used for numerous outputs for the user’s benefit.

When a signal travels via a splitting device, it is often less powerful and weaker. A two-way splitter will include 50% of the main signal, while a four-way device will show just 1/4th of the full signal strength.

The amplitude of the signal decreases as the number of splitters increases. Even if you don’t employ every component, this principle remains valid. To achieve the optimal signal speed, limit the number of splits.

Do Cable Splitters have Different Qualities?

Quality varies depending on what kind of products you buy.

If the coax cable quality is poor, the cable splitter won’t be able to give wideband resistance. Thus, it will produce more noise, attenuate the signal, and negatively degrade the video quality.

A high-quality cable splitter comes with a printed circuit to guarantee the splitter functions correctly. It simultaneously minimizes signal loss and filters out any extra noise.

How To Use A Cable Splitter For Internet and TV?

cable splitter for TV and Internet
Image Source

Step 1: Identify the place of connection

  • Do you need to install a cable splitter? It’s time to get an appropriate place! Pick a spot beside the cable line in your room.
  • Measure the distance between the equipment and the splitter you wish to connect. That’s the length of your coaxial wire.

Step 2: Disconnect from the line

  • It is important to disconnect the line from any connected devices. You should talk with users about the best time to do this.

Step 3: Connect the Cable Lines Correctly

  • Connect the cable to the input end of the splitting device.
  • Connect the coaxial cable to the output port of the splitter and your devices.

Step 4: Secure the Connecting Points

  • Fasten the cable connections. To achieve the desired result, you can use a wrench or a plier to tighten it.
  • Ensure the devices or splitter do not get damaged in this step.

Step 5: Verify that all devices are receiving signals

Now it is time to test everything and make sure that the installation went smoothly. Reboot all devices to verify that they are receiving the internet and TV signal.

Step 6: Additionals

You can skip this step.

  • To hide the wires, install a cable outlet.
  • You can place a wireless router nearby your laptop or PC to speed up the process.

How to Connect Cable To Another Room Using A Cable Splitter

cable splitter for different rooms

If you have multiple TVs, make sure that the room is wired to receive TV signals.

If the answer is yes, then connect the receiver to the cable. If you don’t have the wiring, then you will need a coaxial cable splitter.

  • Connect the main cable to the 2-way splitter (for 2 receivers).
  • Connect the coaxial cable to the output port on the splitter and the receiver’s input with its opposite end.
  • Once you have connected the cable receiver to your TV using HDMI, RCA, or coaxial cables, you’re good to go!

Cautionary Notes

  1. To avoid tangles of cables, keep the length of your coaxial cable as short and manageable as possible.
  2. Limit the number of splits so that each signal has some strength.
  3. Call the cable company if the signal is weak or the internet connection feels slow.
  4. It is difficult to receive secondary coaxial cable signals from more than 50 feet away. In such cases, it is best to use an amplified splitter.
  5. Before installing the splitter, test the internet speed. After the test is over, you can check again to ensure that everything has been properly installed.

Final Words

There are many options for cable splitters, including active, passive, even, and amplified versions. You can easily choose the one that fulfills your requirements.

Where can you get them?

Ask in any local electrical store!

It’s also quite affordable!

It is important to indicate whether you need a splitter to transmit internet signals. A regular TV splitter will not be able to do so.

This is an easy way to connect multiple TVs, electronic devices, and monitors to one cable splitter.

We hope you found our article helpful in the installation process. It may also be helped to keep your budget under control by entertaining your all family members with one connection.